PIERI® MARB-A-LIKE is an all-weather, non-staining form release agent for easy, void-free and smooth release of concrete. PIERI® MARB-A-LIKE produces high quality architectural precast finishes. PIERI® MARB-A-LIKE will not interfere with paints or other coatings when properly applied and is high temperature resistant while providing corrosion resistance to steel forms with no powdery residue. Coverage: approximately 2,500-3,000 ft2/gal (61-74 m2/L).
Apply PIERI® MARB-A-LIKE by brush, roller, sprayer, lightly oiled mop or by fogger on steel, sealed concrete and wood forms, fiberglass, Plexiglas or other synthetic forms. PIERI® MARB-A-LIKE provides high quality void-free snow-white smooth castings and can be used with gray cement.
Directions for Use
Remove any oil or grease residues from prior use of other release agents. Apply PIERI® MARB-A-LIKE on the forms to cover about 3,000 sq. ft. / gal. Do not over apply and allow to dry for approximately 10-15 minutes before pouring or placing concrete into the treated form. Finally, strip the mix from the forms after adequate curing.
Do not allow the over-sprayed release to dry if additional mopping or wiping will be required.
Packaging & Handling
PIERI® MARB-A-LIKE is available in 275 gallon (1041 L), 55 gallon (208 L) drums and 5 gallon (19 L) pails. Product has a shelf life of two years from date of manufacture if stored in in a cool dry place, in its closed original container. Keep away from all sources of heat, sparks or flame.
Specific Gravity: 0.80
Flash Point: 133°F (56°C)
Read SDS before use.
gcpat.com | North America Customer Service: 1 877-4AD-MIX1 (1 877-423-6491)
We hope the information here will be helpful. It is based on data and knowledge considered to be true and accurate, and is offered for consideration, investigation and verification by the user, but we donot warrant the results to be obtained. Please read all statements, recommendations, and suggestions in conjunction with our conditions of sale, which apply to all goods supplied by us. No statement, recommendation, or suggestion is intended for any use that would infringe any patent, copyright, or other third party right.
PIERI is a trademark, which may be registered in the United States and/or other countries, of GCP Applied Technologies Inc.This trademark list has been compiled using available published information as of the publication date and may not accurately reflect current trademark ownership or status.
© Copyright 2018 GCP Applied Technologies Inc. All rights reserved.
GCP Applied Technologies Inc., 62 Whittemore Avenue, Cambridge, MA 02140 USA.
In Canada, GCP Canada, Inc., 294 Clements Road, West, Ajax, Ontario, Canada L1S 3C6.
This document is only current as of the last updated date stated below and is valid only for use in the United States. It is important that you always refer to the currently available information at the URL below to provide the most current product information at the time of use. Additional literature such as Contractor Manuals, Technical Bulletins, Detail Drawings and detailing recommendations and other relevant documents are also available on www.gcpat.com. Information found on other websites must not be relied upon, as they may not be up-to-date or applicable to the conditions in your location and we do not accept any responsibility for their content. If there are any conflicts or if you need more information, please contact GCP Customer Service.
Last Updated: 2018-11-29